IC694MDL330
The GE Fanuc IC694MDL330 is an Output Module installed in any I/O slot in the Rx3i system. The module has a rated voltage of 120/240 Volts AC and a current output of 2 Amperes.
About
The GE Fanuc IC694MDL330 Output Module has a rated voltage of 120/240 Volts AC, an output current of 2 Amperes, an output voltage range of 85 to 264 Volts AC at a frequency of 50/60 Hertz and inrush output current of 20 amperes maximum for a single cycle. It has 8 output points that are divided into two isolated groups with 4 points each. Every group contains a separate common which are not tied together in the module. The two groups can be powered from a single supply or used on separate AC supply phases. The GE Fanuc IC694MDL330 Output Module must have user-supplied AC power for loads linked to the outputs to operate. The IC694MDL330 Output Module can only operate with AC power supply, but cannot function using a DC power supply.
The two groups of the GE Fanuc IC694MDL330 Output Module are safeguarded with a 5 Amperes fuse for each common. Every output has an RC snubber for protection in case of transit electrical noise. This output module has an operating temperature ranging from 0 to 60 degrees C (32 to 140 degrees F). A storage temperature range between -40 to 85 degrees C (-40 to 185 degrees F) and anon-condensing humidity starting from 5 to 95%. It has a vibration of 10 – 57 Hertz, 0.0524 millimeters (0.006 inches) displacement peak, 57 – 500 Hz, 1.0 g acceleration having conformed to JISC0911, and IEC60068-2-6 standards. Also, the module has a shock of 15G, 11milliseconds as per JISC0912, and IEC60068-2-27 standards.