Rifle Accurizing
Student’s Name
Institution Affiliation
Course Name and Number
Instructor’s Name
Submission Date
Rifle Accurizing
Rifle bedding refers to the process of providing a hard, consistent and rigid foundation for the rifles operational components through creating a close-fitting and stable surface between the rifles gun functional parts which include the receiver housing and the barreled action and the support part the stock which deforms with time with pressure from the under shift shear stress of the recoil from firing. Rifle bedding is done for the objective of accurizing the rifle and even prolonging the life of the rifle. During the bedding process, is often done in the aftermarket of the rifle (Warburton, Rozum & Potter, 2014). The process of bedding involves moulding the epoxy-based on the material to the stock recess in order to effectively fill the away gaps in its contact surface through the receiver also known as the glass-bedding and putting in metal cylinders around the action screws to lower the compressive changing. Additionally, during the process, the receiver and the stock are at that time fastened indirectly through the intermediate piece known many as the bedding block. During bedding, it serves a larger pillar and a bedding surface for recoil lugs (Warburton, Rozum & Potter, 2014) functionally. During this process, the contact interface in the stock might be substituted with a metallic bedding frame which is referred as chassis which is either embedded between the stocks or through completely replacing the stock just like the lower receiver in many modern modular self-loading rifles.
In a Remington 700, the barrier should be free for floating. For this rifle, I would free float it in order to check and make sure that it is. During the free-floating, I would make sure that it makes the difference in the range and let the results to be the main guide. On this case, if the action is not glass bedded, it might shoot the erratic without any pressure within the joints (James, 2018). For the rifles, I would perform the free float for the barrel means that the barrel does not even touch the stock along its length at any point. It is free effectively move along during the shot within the normal manner less the interference from the stock allowing its performance to become more accurate and consistent.
In a rifle, mock bedding refers to the process of providing the consistent and rigid rifle for rifle operational components through creating a close-fitting and stable surface between the rifles functional parts. Mock bedding has different purposes which it performs. The wooden stocks it happens as the seal which is exposed the wood (Warburton, Rozum & Potter, 2014). However, the primary operation of both the synthetic and wood stocks is to give the action towards full contact within the stock hence preventing it from moving inside the stock in a certain an accuracy wrecker. On the other hand, final bedding refers to the process of improving the accuracy of the rifle part through relieving the stress on the action (James, 2018). During the action, the rifle action rarely sits on the stock flush without bedding (Fox, 2020). At any moment when the actions shifts and does not come back to the same spot, the stock might lose its ability to maintain it at zero.
References
Fox, D. M. (2020). Final Battles of Patton’s Vanguard: The United States Army Fourth Armored Division, 1945-1946. McFarland.
James, C. R. (2018). Small-Bore Rifles: A Guide for Rimfire Users. Simon and Schuster.
Warburton, S., Rozum, B., & Potter, D. (2014). U.S. Patent No. 8,881,444. Washington, DC: U.S. Patent and Trademark Office.