Best Space Heater for Large Room with High Ceilings
- Dr. Infrared Heater
Pros
- The advanced dual heating system and temperature controls can be used to adjust performance according to requirements
- It has advanced inbuilt safety features including an automatic shut-off timer that operates on a 12-hour basis and a tip-over switch
- It is easy to maintain the heater by removing and cleaning the filter regularly
Cons
- Unsuitable for use in large spaces that measure more than 130 square feet
The Dr. Infrared Heater can be the right choice for heating large rooms with high ceiling, thanks to its heating capacity. Its dual heating system provides sufficient heat via infrared radiation to warm air in rooms that measure up to 130 square feet. You can toggle the heating mode of the heater between high and low. When operating in the high mode, the heater consumed 1,500w of energy. At the low mode, it consumes 750w.
The ability to heat large spaces with high ceilings is nothing if a heater does not have good safety features. luckily, Dr. Infrared Heater has several advanced inbuilt safety features. The tip-over feature prevents the heater from causing fires if it gets accidentally knocked over. The heater automatically switches off when it falls.
The automatic shut-off timer protects the heater from overheating when you leave it on for a long time. You can program the heater to automatically switch off before the lapse of 12 hours.
- DeLonghi Oil-Filled Radiator Space Heater
Pros
- Highly portable because of the preassembled wheels
- Requires minimal maintenance processes because the diathermic oil does not require to be replaced
- Advanced control features help to effectively regulate the heat in large rooms with high ceilings
Cons
- It can easily get damaged when repeatedly moved around the house
Heating large rooms that have high ceilings is a complex process. You need to balance between the need to maintain a cozy environment and the desire to minimize your energy consumption.
The DeLonghi Oil-Filled Radiator Space Heater has been designed to help you address these challenges effectively. With an inbuilt thermostat that can be adjusted across the heating and temperature settings, a fully secure diathermic oil compartment, and a patented ComfortTemp feature, this heater can help you minimize your energy expenses and maintain a warm environment at home.
You can personalize its performance to your preferences by toggling between high and low heating modes and letting the ComfortTemp feature automatically maintain an ideal temperature in your high ceiling room without wasting much energy on the heater.
Although this heater has preassembled wheels that you can use to move it to any location easily, it may get damaged in the process. You need to be careful when moving the heater regularly from one room to another.
- Duraflame 3D Infrared Electric Fireplace Stove
Pros
- Easy and convenient adjustment using the remote control
- The heat maintains natural humidity in the room and prevents the drying of air
- Enhanced personalization capabilities, including the ability to change the color and heating temperature of the flame
Cons
- The surface can be quite hot when the fireplace operates for a long time
The Duraflame 3D Infrared Electric Fireplace Stove can be the right device for heating your high-ceiling room because of its heating capacity and design. This electric fireplace stove consumes either 1,500 or 750 watts of power to provide warmth in rooms that measure up to 150 square feet. The traditional log set flame bed is quite effective in steadily providing heat for warming large rooms that have high ceilings.
A good heater for large rooms should have multiple settings for your convenience and personalization. This heater comes with a remote control that you can use to adjust the colors of the flame and its temperature. Furthermore, you can use the remote control to change the settings of the inbuilt thermostat according to the heating requirements of your home.
However, this heater has one major drawback: it can easily get very hot when used for a long time. You need to ensure that the kids and pets do not play around the heater when you are using it.
- De’Longhi Ceramic Tower Heater
Pros
- Reduces energy consumption for heating because of the way the ceramic heating element operates when the heater is set on eco mode
- It has a very small footprint and can be conveniently placed in any location
- The heater has several advanced inbuilt safety features, including an automatic thermal shutoff
Cons
- The heater can easily get knocked down because the base is not wide and heavy enough to offer great stability
The De’Longhi Ceramic Tower Heater provides a great solution for heating your high ceiling room because of its great heating capacity and mode of operation. Although it has a standard heating capacity of between 750 and 1,500w, it has an innovative oscillation feature that can be used to enhance the heating process.
When the heater is set on the oscillation mode, it effectively circulates the heated air across large rooms fast and for long. Thus, you will experience a cozy feeling quickly and for longer when you use this heater in the room.
The only thing that you need to watch out for when using this heater is that its base is not as stable as you would expect. The heater can easily get toppled over when hit with moderate force.
- e-Flame USA Regal Freestanding Electric Fireplace Stove
Pros
- Great aesthetics as a result of a classic white finish, a 3D body, and enhanced flame characteristics
- Very portable for ease of use across the home
- Provides supplemental heat in large rooms that measure up to 400 square feet
Cons
- It is difficult to clean and maintain the electric fireplace stove
The design and style of this electric fireplace stove stand out from other similar devices with equal heating capacity. A Standard wall-mountable electric heater can be used to provide a great aesthetic touch to your house.
However, this electric fireplace store provides you with greater flexibility. You can place the heater at any place in your home. Besides, its 3D body complements the realistic appearance of the flames on the faux heath to provide a great look in your home.
Moreover, it is easy to move the electric fireplace stove from one room to another because of its design. This gives you added flexibility and freedom when using the heater.
However, this electric fireplace has one major drawback: it is difficult to maintain it. Normally, cleaning electric fireplace stoves is more involving than for standard wall-mountable electric fireplaces. But if you understand how to do it, then using this electric fireplace heater would be beneficial in the long-term.
- Heat Storm HS-1500-PHX
Pros
- It is Wi-Fi enabled for enhanced and convenient control using a smartphone
- The installation/wall-mounting process is easy to follow
- Great safety features, including cool-to-touch
Cons
- May be unsuitable for use in very large rooms
The Heat Storm HS-1500-PHX is an amazing wall-mountable electric fireplace that you can conveniently use to provide warmth in standard-sized spaces such as living rooms and offices.
One of the things that make this electric fireplace stand out is its ease of installation. The mounting brackets are easy to handle and can hold the heater at any location on the wall in your house.
Besides, you can easily locate the heater appropriately to ensure that the warm air that it produces reaches every corner of your room quickly. Additionally, you can use the mounting location to create a focal point in the room and enhance the overall look.
The Heat Storm HS-1500-PHX comes with the Wi-Fi functionality. It is easy to connect the heater in your home Wi-Fi network and control it according to your requirements via a smartphone.
However, this heater may strain when you use it in large rooms such as massive living rooms that measure over 150 square feet. You may have to mount it higher up to ensure that it warms the air fast enough to make the room comfortable.
- Heatwave System
Pros
- Can be embedded in showers because it is wet-rated
- The programmable thermostat can be used to change the heating strength according to your requirements
- An innovative heating system that does not require maintenance procedures
Cons
- Installing the heating system is time-consuming and complex
Installing the Heatwave System can be a very innovative and effective way of providing consistent heat in the room. The system is usually embedded under the concrete all around the house. It is wet-rated, therefore, you can use it on the bathroom floor.
Once the programmable thermostat has been set, the floor heating system steadily warms the entire house. Because warm air naturally rises as cool air takes its place, installing this system in your high-ceiling house can effectively provide the warmth and comfort that you need.
Having this system in your house eliminates the risks that are associated with standard heaters, including accidents and overheating. You do not have to worry about safety or the décor of your house if you choose to install the Heatwave System.
However, this floor warming system cannot rival ceramic or oil-filled heaters in terms of generating heat quickly. Some heaters have in-built fans that accelerate the distribution of heat across large spaces. Moreover, installing the floor heating system is a complicated process that requires an expert.
Buying Guide
Type of Heating System
The heating system is an important thing that you should consider when buying a space heater for rooms with high ceilings. This is the case because the type of heating system determines how effectively the heater warms your room. Also, the heating system type plays a key role in determining the level of efficiency of your heater. The level of efficiency is how well a heater consumes energy to warm your room.
Two main heating systems are used in heaters: infrared and convective. Heaters that use the infrared heating system deliver infrared radiation to physical objects within the room. The objects include walls, furniture, and even the floor. When the objects absorb the infrared radiation, they start releasing the heat to the air within the room.
The infrared radiation type of heating is very efficient. On the one hand, heaters that work using this mode tend to provide warmth in large rooms very fast. The heating of inanimate objects within a space takes place instantly, thus creating a perfect solution for rooms with high ceilings.
Additionally, infrared heaters are good for large spaces with high ceilings because they help to provide a steady source of heat for a long time. Heating such spaces are always difficult because of the massive temperature differences between the floor and the roof. However, infrared heaters can effectively provide the much-needed heat for a long time.
Convective heaters work by warming the air that comes into contact with the heating element. The heaters have a glowing element that repeatedly heats the air currents that flow across it. As the air currents get heated, they rise and immediately get replaced by cool air currents. The process repeats as long as the heater is on.
Convection heaters are not ideal for heating large spaces with high ceilings. Although naturally, warm air rises and is replaced by cool air, this process is not effective enough to counter the high-temperature gradient that is usually a permanent feature in large spaces with high ceilings.
The circular flow of air that is created by convective heaters may be ideal for warming small places with standard or even low ceilings. Also, because this type of heater relies on effective airflow, it has to be placed near natural openings in a building for it to be efficient. If you keep many natural apertures in a large room with a high ceiling, open for long, you may not achieve the ideal ambient temperature easily.
The Goal of Heating Large Spaces with High Ceilings
The determine the heating requirements of a large room with high ceilings, it is necessary to consider a few important factors. First, the difference in temperature between the outdoor air and room air determines the amount of energy that you need to spend to keep the space warm.
The temperature of outdoor air is subject to changes in the weather and the location of your house. Outdoor temperature dips when in the winter and rises steadily during the summer. Also, the temperature fluctuates across the day and night. This is largely beyond your control; however, it affects the amount of energy that you end up spending for your house.
The temperature within the room should be maintained within an acceptable range. This largely depends on your preferences and the prevailing conditions outside. When the difference between the outdoor and indoor air temperature is high, then you will require to utilize a lot of energy to keep the inside of the room cozy.
If the difference in temperature between the outdoor and indoor air is low, then your energy expenditure will decrease. This factor determines the kind of heater that you may need to warm your house. When the fluctuations are high, using a heater that has high heating capacity but standard power consumption rates may be the right thing to do.
Heating capacity and controls
The heating capacity of your heater determines how well it can generate warmth in large spaces. Ideally, you can toggle between the high and low heating capacity modes depending on your energy requirements. At high capacity mode, heaters consume 1,500w while at low heating mode, they utilize 750w.
Additionally, heaters have numerous controls that you can use to adjust their performance. Some electric fireplaces have up to five settings for heating temperature and color of the flames. The higher the level of control, the better it is to use the heater to warm your rooms. This is so because you can adjust the heater based on prevailing indoor and outdoor weather conditions.
Zone heating
Not all the areas in a large room with high ceilings need to be warmed evenly. Ideally, maintain a uniform temperature within the living zone and in the zones where people spend the most time in. Attempting to achieve and maintain uniform temperature across the entire space that has a large ceiling may cause your energy bill to shoot through the roof.
Infrared heaters may be used to provide warmth in areas where the heat is needed most at any given time. Even heaters that have little capacity may be effectively used to provide warmth in large spaces if you use their controls properly.
Low-temperature gradient
The temperature gradient of a room refers to the difference in warmth between the ground and the ceiling. This difference is of great significance in houses that have high ceilings. Big differences in the temperature between the ground and the ceiling make the dwelling zone of a house uncomfortable.
To address this problem, use infrared heaters. The infrared rays directly warm objects in the house within a few seconds of setting the heater on. The inanimate objects then steadily release heat to the atmosphere. Thanks to this mode of operation, using such heaters for high-ceiling places reduces the temperature gradient very significantly.
Moreover, when you use infrared heaters in spaces with high ceilings, you overcome the danger of overheating. Conventional heaters are known to easily create overheating problems when they are let to run for a long time. However, using infrared heaters helps to reduce the temperature gradient to an unnoticeable level and eliminates the danger of overheating.