Self-reflection on Dentures
The combination made between Cobalt and chrome is significant in making alloys that are not vulnerable to corrosion. The denture makes the two metals stronger and lighter, thus improving its comfortability and also its thinness. The clinical denture was formed by creating a shape that would allow the teeth formation to be in alignment with the opposing dentition. The denture served to fit the whole framework through calculated spaces of about 3mm away from gingival margins. The dentures were curved gently into the saddle areas to help fit in the framework. The cleaning was done under cold water, and the surfaces polished with a rubber wheel. The polishing was done with a handheld bristle brushes and the end-stage polishing done using a lathe. After the polishing was the buffing process were a cotton mop was used. After the buff, the denture was expected to fit and therefore taken back to a clinician for a try in.
My personal opinion on the mentioned above process is that it takes a longer time to finalize the whole structure. It also requires an exceptional keenness and skill to make a good set, which is of shape and can fit in the framework. With in-depth analysis, the denture made in this process is better than others like acrylic dentures and, therefore, a better investment plan. The chrome- cobalt dentures are durable as initially put. Therefore I would recommend it quickly since it does not easily break, it is less bulky, light, and more comfortable within the mouth. Besides, the denture herein is obscured when you smile and talk too. In my opinion, the modeling’s technicality requires a useful expertise feature; thus, an essential process.
Considering the process used to develop the denture model, in my understanding, the appliance would function with ease and serve its purpose at the best rate possible. The rest of the teeth are engaged in undercuts. The primary connector is done 3mm away from the margins and further gently curved into the minor connectors to ensure its functionality. The teeth are positioned in correct occlusion with the opposing dentition, and therefore it appropriately joins the retention. The aesthetics used help restore the functionality and further display the teeth’ naturalist as much as possible. The teeth would be clinically aesthetic since it is quality, and it serves the visionary approval and also its functionality. The denture will not damage its lightweight, less susceptible to breakage, and more comfortable in the mouth. When using dentures, you have to stick to soft food, which doesn’t require much chewing. Other demerits that are manageable are irritation, loose dentures, and slipping dentures. The irritability is caused by the foreignness of objects within the mouth, which is the dentures. The body takes time to get used to that. Loose dentures are fixed by correct fixation and also using models that fitfully. Slipping dentures are solved by realignment, and therefore the whole process cannot easily cause any form of damage.
Critical bridging of dentures to my future studies ad works reflects on a more durable denture type and that which will not corrode at any instance even when put in non-suitable condition. The looseness must be appropriately checked and ensure it solves the fitness and comfortability. It is significant generally to accept that some processes did not require any adjustment. The 3mm measurement for the vertical dimension occlusion is considered complete and therefore it suctions smoothly to the gums. However, the whole process requires special care in its management, and therefore, that gives me a platform to engage in.