The Eaton Cutler-Hammer 92-01941-01

The Eaton Cutler-Hammer 92-01941-01

92-01941-01

The Eaton Cutler-Hammer 92-01941-01 operator interface is a PanelMate Power Pro 1700 Operator Interface. The PanelMate is a DC powered system with a 24 Volts DC of power Voltage, 23 Watts of power consumption, and 1.1 amperes of electric current.

About

The Eaton Cutler-Hammer 92-01941-01 PanelMate Power Pro 1700 Operator Interface has both touchpanel and touchscreen (acrylic) for operator input. The unit is a DC powered system with a 24 Volts DC of power Voltage, 23 Watts of power consumption, and 1.1 amperes of electric current. The PanelMate Power Pro 1700 Operator Interface has a fault relay of 2 Amperes at 240 Volts of alternating current and 2 Amperes at 28 Volts of direct current. It has an optional Audio Feedback Kit with an external 8 Ohms speaker. The unit has a security keyswitch for external password/ security applications. The 92-01941-01 PanelMate Power Pro 1700 Operator Interface serial port 1 can be used for PLC/ Tost communications, printer, or connection to a computer for either download or upload. Serial port 2 can be used for PLC/ Host communications or link to a printer.

When the 92-01941-01 Operator Interface is powered up, it will show a listing of internal diagnostic checks. After completion of the diagnostic tests, the panel will go to Offline Mode Menu with the following selections Execute diagnostics, Serial Transfer Mode, Network transfer Mode, System Configuration information, Run Mode, and Calibrate Touch screen. The Execute Diagnostics allows you to carry out tests such as display test, system status, set date and time, tone, relay and battery test, and touchscreen test. It has a temperature rating with a T4A code and a temperature marking of 120 degrees C. the operating temperature for this PanelMate Power Pro 1700 is 0 to 40 degrees C.