Gate opener batteries
In most cases, gate opener batteries are similar to car batteries. These batteries’ life span depends on its usage. In some caIn most cases gate opener batteries are similar with the car batteries. These batteries’ life span depends on its usage. In some cases people come and find their gates half opened because their battery ran out of power. It is good to know how long the gate opener battery will last for it to be replaced. There are some factors which affect the life span of the battery. For example, factors like lack of good maintenance, weather and the recharge voltage. A gate opener battery when damaged or when they’re low battery, they need to be replaced following some process.
To replace a gate opener system with a low battery, there are some steps you need to follow so as to make sure they are well replaced. The following steps are used while replacing a gate opener battery;
- Remove the system control box cover by sliding it off
Technically, once you slide off the cover of the system control box, the battery light is flashy indicating that it has low battery condition unlike when it’s full, the light is not flashy. The system control box is covered for safety measures to avoid it being tampered with by persons or other unfavourable conditions. This is where the point where the gates are controlled whether to open or close. Therefore when the control system is damaged the gates will not open and close, whether the batteries are low or fully charged.
- Turn off the whole system
Turning off the system will prevent accidents like electric shocks or shot circuits which causes damages to the gate opener system. This will cost you so much since you will have to replace the whole system including the batteries. In many cases, when working on an electric system, it is always turned off.in your case, turn off the system using the button placed on the bottom.
- Taking the batteries out
When the system is off, remove the battery box cover by sliding it off and take your first low battery. Remove the negative terminal first that is the one which s black in colour. This is because it is connected to the ground and it is the only possible advantage of disconnecting the positive terminal. Remove the positive terminal which is indicated by the red colour. The positive terminal is removed at last because if removed before the negative terminal and it makes contact with any part of the system, it will cause a short in the system.
- Installing the new battery.
After you remove the low battery, grab the new replacement battery for example the mighty mule. In this case the positive terminal is installed into the new battery first followed by the negative terminal. This is because if you install the negative terminal into the new battery first, you can wretch and the positive terminal comes into contact with a part in the system. This completes the circuit hence a short can occur damaging the whole system. To avoid the damages install the positive terminal first. Though some people tend to ignore this it is very important while replacing a battery for your own safety and the safety of the control system.
https://www.etrailer.com/question-211991.html
- Install the battery back into the box
When you’re done with installing the terminals into the new battery, install the battery into the battery box and slide the battery box cover in. covering the battery box is always for security measures to avoid damages from people or weather, hence helping in maintaining it. For example when the battery box is not covered, a person can tamper with it or destroy it, or when it is rainy the batteries get wet and it can bring about corrosion or electric shots.
- Turn the system on
Once you’re done with the batteries, turn on the system and check the battery condition light. The light is now solid indicating a full battery, unlike when the battery was low the battery light was flashy. The system will work very good and faster since the power is high. If you own more than one system, repeat the process using this steps on each of the system.
Gate opener battery replacement is a simple process which you can do it instead of calling a person from the company to do it. In conclusion, when replacing the gate opener batteries, always make sure the system is off for safety measures. It is the easiest way of replacing a battery and very cheap. Use a battery from a good brand like the 12V Mighty Mule. With the help of the above steps, replace your batteries in your house hold gates. Since a gate opener battery is like the car battery, with the knowledge of replacing these opener gate batteries, you can also replace your own car battery.ses, people come and find their gates half-opened because their battery ran out of power. It is good to know how long the gate opener battery will last for it to be replaced. Some factors affect the life span of the cell—for example, factors like lack of proper maintenance, weather, and the recharge voltage. A gate opener battery when damaged or when they’re low battery, they need to be replaced following some process.
When replacing a gate opener system with a low battery, there are some steps you need to follow to make sure they are well replaced. The following steps can be while replacing a gate opener battery;
- Remove the system control box cover by sliding it off
Technically, once you slide off the cover of the system control box, the battery light is flashy, indicating that it has a low battery condition. Unlike when it’s full, the battery light is not flashy. The system control box is covered for safety measures to avoid it being tampered with by persons or other unfavorable conditions. It is the point where the gates are controlled, whether to open or close. Therefore when the control system is damaged, the gates will not open and close, whether the batteries are low or fully charged.
- Turn off the whole system.
Turning off the system will prevent accidents like electric shocks or short circuits, causing damage to the gate opener system. This will cost you so much since you will have to replace the whole system, including the batteries. In many cases, when working on an electric system, it is always turned off. In your case, turn off the system using the button placed on the bottom.
- Taking the batteries out
When the system is off, remove the battery box cover by sliding it off and take your first low battery. Remove the negative terminal first, which is the one which s black. This is because it is connected to the ground, and it is the only possible advantage of disconnecting the positive terminal. Remove the positive terminal, which is indicated by the red color. The positive terminal is removed at last because if withdrawn before the negative terminal and it makes contact with any part of the system, it will cause a short in the system.
- Installing the new battery.
After you remove the low battery, grab the new replacement battery, such as the mighty mule. In this case, the positive terminal is installed into the new battery first, followed by the negative terminal. This is because if you fit the negative terminal into the new battery first, you can wretch, and the positive terminal comes into contact with a part in the system. This completes the circuit; hence a short can occur damaging the whole system. To avoid the damages, install the positive terminal first. Though some people tend to ignore this, it is crucial while replacing a battery for your safety and the safety of the control system.
https://www.etrailer.com/question-211991.html
- Install the battery back into the box
When you finish installing the terminals into the new battery, connect the battery into the battery box, and slide the battery box cover in. Covering the battery box is always for security measures to avoid damages from people or weather, hence helping in maintaining it. For example, when the battery box is not covered, a person can tamper with it or destroy it, or when it is rainy, the batteries get wet, and it can bring about corrosion or electric shots.
- Turn the system on
Once you’re done with the batteries, turn on the system and check the battery condition light. The light is now stable, indicating a full battery, unlike when the battery was low, the battery light was flashy. The system will work very well and faster since the power is high. If you own more than one system, repeat the process using these steps on each of the systems.
Gate opener battery replacement is a simple process in which you can do it instead of calling a person from the company to do it. In conclusion, when replacing the gate opener batteries, always make sure the system is off for safety measures. It is the easiest way of replacing a battery and very cheap. Use a battery from a good brand like the 12V Mighty Mule. With the help of the above steps, replace your batteries in your household gates. Since a gate opener battery is like the car battery, with the knowledge of replacing these opener gate batteries, you can also replace your car battery.