IC694MDL350
The GE Fanuc IC694MDL350 module from the RX3i PacSystem series is an Output Module installed in any I/O slot in the Rx3i system. It has a rated voltage of 120/240 Volts AC.
About
The GE Fanuc IC694MDL350 Output Module offers 16 isolated output points and is available with a rated voltage of 120/240 Volts AC. This module has an effective and remarkable noise immunity that reduces the use of external snubbers to shield the outputs against noise from the electrical transient. The outputs are capable of handling a variety of inductive and incandescent loads. The output loads can only be powered using a supply from an external AC power. At the rear of the output module, there is a DIP switch for selecting the outputs’ mode, such as Hold Last State or Force Off. You must remove the IC694MDL350 Output Module from the backplane to configure the switch. This Module can be used with Terminal Blocks such as Spring-style (IC694TBS032), Box-style (IC694TBB032), Extended Spring-style (IC694TBS132) or Extended Box-style (IC694TBB132) Terminal Block. The extended terminal block offers an additional protective casing necessary for field wiring to AC appliances.
The GE Fanuc IC694MDL350 Output Module from the RX3i PacSystem series has labeled LEDs to display the ON/OFF status of every output point. Also, it has a TB LED to mean that the module has terminal blocks that are removable. If the TB LED turns green, it shows the Terminal block’s presence, or when the TB LED red shows the absence of Terminal Block. The red band at the top of the door card means the MDL350 module is a high-voltage. The module has an operating temperature of 0 to 60 degrees C: [inlet] (32 to 140 degrees F) and a storage temperature of -40 to +85 degrees C (-40 to 185 degrees F)
